Medical PSA Oxygen Generation Unit

Medical PSA Oxygen Generation Unit
Product Introduction:
NEWTEK Medical PSA Oxygen Generation Unit uses the third generation of pressure swing adsorption (PSA) technology to achieve a stable output of oxygen purity of 99%±0.5% by adsorbing nitrogen with molecular sieves, breaking through the high cost limitations of traditional liquid oxygen storage and transportation. Its intelligent pressure regulation system can dynamically optimize the adsorption cycle, reducing energy consumption by 40% compared to traditional equipment, and achieving 24-hour uninterrupted oxygen supply.
✅medical certification
✅ 93%-99.5% stable oxygen concentration

✅ 7*24*365 hours intelligent maintenance reminder

✅ Dual flow mode (continuous/pulse)

✅ <45dB ultra-quiet design
Send Inquiry
Description
Technical Parameters
NEWTEK core technology highlights

Modular design

supports uninterrupted switching of oxygen supply to ensure oxygen continuity in highly sensitive scenarios such as ICU and operating rooms (failure rate <0.01%/year)

AI early warning module

built-in sensors monitor oxygen concentration, humidity and equipment operating status in real time, predict the life of molecular sieves through algorithms, and trigger maintenance instructions in advance

PSA Medical Oxygen Generation Plant

30+

professional teams

100%

positive reviews

10k+

Order recieved

500+

Projects Completed

 

NEWTKE-NTK95 Series

No. Models Capacity (Nm3/hr) Purity Power consumption of 1Nm3 oxygen produced (kw/h) Number of bottles filled in 12 hours (pcs) Operator  needed
1 NTK95-5P 5 95%+-1% 3.54 10 2
2 NTK95-10P 10 95%+-1% 2.52 20 2
3 NTK95-15P 15 95%+-1% 2.31 30 2
4 NTK95-20P 20 95%+-1% 2.13 40 2
5 NTK95-25P 25 95%+-1% 2.01 50 2
6 NTK95-30P 30 95%+-1% 2.09 60 2
7 NTK95-40P 40 95%+-1% 1.81 80 2
8 NTK95-50P 50 95%+-1% 1.94 100 2
9 NTK95-60P 60 95%+-1% 1.62 120 2
10 NTK95-80P 80 95%+-1% 1.92 160 2
11 NTK95-100P 100 95%+-1% 1.83 200 2
Design basis: Altitude:≤500m;RH:≤80%;Temperature:0℃-38℃;Filling pressure: 150Bar 40L Type Standard Cylinder

 

 

Deep adaptation of vertical medical scenarios
 

In response to the compliance and safety requirements of the medical industry, the product has passed the European Medical Equipment Quality Management System Certification and is adapted to the following scenarios

Emergency and intensive care

The instantaneous oxygen supply flow rate can reach 120L/min, meeting the needs of high-flow equipment such as ventilators and ECMO.

Grassroots medical sinking

Modular design supports flexible configuration of 10-500 beds, solving the pain point of lack of oxygen supply facilities in remote areas

Drug research and clinical trials

Commit to 4-hour fault response and 48-hour spare parts delivery to ensure the continuity of key medical services

 

 

 

Medical PSA Oxygen Generation Unit
Industry Value

Take a 300-bed general hospital as an example and compare it with the traditional liquid oxygen solution

Indicators 传统液氧方案 NEWTEK PSA方案
Annual oxygen supply cost 1.8 million 95k
Carbon emissions 120 tons/year 25 tons/year
Space occupancy 80㎡ 15㎡

 

Choosing NEWTEK is not just choosing a device, but also choosing the next generation of medical oxygen supply infrastructure.

(For product parameters and customized solutions, please visit the official website or contact the regional technical consultant to obtain in-depth technical documents) 

 

 

 

 

Hot Tags: medical psa oxygen generation unit, China medical psa oxygen generation unit manufacturers, suppliers, pressure swing adsorption oxygen plant, vpsa plant, Container oxygen generator, Container PSA Oxygen Plant, On site nitrogen generators, oxygen generator psa

Send Inquiry
Ready to see our solutions?

PSA Oxygen Plant

●What is the O2 capacity needed?
●What is O2 purity needed? standard is 93%+-3%
●What is O2 discharge pressure needed?
●What is the votalge and frequency in both 1Phase and 3Phase?
●What is the working site temeperature averagely?
●What is the humidity locally?

PSA Nitrogen Plant

●What is the N2 capacity needed?
●What is N2 purity needed?
●What is N2 discharge pressure needed?
●What is the votalge and frequency in both 1Phase and 3Phase?
●What is the working site temeperature averagely?
●What is the humidity locally?

Send Inquiry