The application of PSA oxygen production equipment in gold smelting mainly revolves around the pressurized pre-oxidation process, which improves the extraction efficiency and environmental friendliness of low-grade ores by providing high-purity oxygen. The following are specific application guidelines and technical points:
1. Application scenarios and technology matching
Low-grade gold ore processing
For low-grade gold ores that are difficult to smelt (such as gold ores wrapped in sulfur-containing minerals), pressurized pre-oxidation technology is used, requiring oxygen with a purity of about 90% (the demand is usually 5000-10000Nm³/h). PSA oxygen production equipment has become the core supporting equipment of this process because of its controllable purity and stable oxygen supply.
Replacement of traditional oxygen supply methods
Compared with liquid oxygen storage tanks or cryogenic oxygen production, PSA oxygen production has the advantages of low investment cost and low energy consumption (about 0.32~0.45kWh/Nm³), which is suitable for small and medium-sized mines or distributed mining areas.
2. Technical advantages and process optimization
Improve reaction efficiency
As a strong oxidant, oxygen accelerates the decomposition of sulfides in the pressurized pre-oxidation reaction, releases the encapsulated gold particles, and increases the subsequent cyanide leaching efficiency by 10%-20%.
It is recommended to control the oxygen purity ≥90% and the pressure 0.8-1.2MPa to meet the high temperature and high pressure reaction conditions.
Environmental protection and resource utilization
Reduce harmful gas emissions (such as sulfur dioxide), achieve zero wastewater discharge and waste slag stabilization, and meet green mine standards.
Optimize tailings treatment through oxygen-enriched combustion and reduce comprehensive energy consumption.
3. Equipment selection and operation recommendations
Key points of equipment configuration
The PSA oxygen generator unit is preferred because its adsorbent regeneration efficiency is higher and it is suitable for large-scale continuous oxygen supply needs.
Operation and maintenance management
Regularly monitor the performance of molecular sieves (test the adsorption capacity every 2 years) to avoid the decrease of adsorption efficiency due to humidity or oil pollution.
Plateau areas need to pay extra attention to the impact of air pressure and temperature on oxygen production, and add pretreatment modules (such as low-temperature drying system) when necessary.
4. Economic benefit analysis
Cost comparison: The unit oxygen cost of PSA oxygen production is about 50%-70% of liquid oxygen, and transportation and storage costs are saved.
Investment recovery period: Taking 5000Nm³/h equipment as an example, the annual operating cost is about 3-4 million yuan, and the investment can be recovered in 1-3 years (depending on the scale of ore processing).
5. Risks and countermeasures
Safety risks
Oxygen is a combustion-supporting gas, and explosion-proof devices and leakage monitoring systems need to be installed, away from flammable and explosive areas.
Process compatibility
It needs to be linked with the pressure and temperature control system of the reactor to avoid the influence of oxygen concentration fluctuations on the stability of the oxidation reaction.

Summary: The core value of PSA oxygen production equipment in gold smelting lies in low-cost oxygen supply + process upgrade, and a customized solution needs to be combined with ore characteristics, processing scale and environmental protection requirements.
